Trades & Services

<ul><li>Assembling parts and sub-assemblies of locks</li><li>Building of lock cylinders and padlocks</li><li>Cutting keys</li><li>Repairing faulty locks</li><li>&nbsp;Installation of locks and door furniture</li><li>Onsite re-keying, and general maintenance and repair of locks and other &nbsp;&nbsp;&nbsp;associated hardware</li><li>Provide advice, estimate of costs and quotations for customer's requirements</li><li>Dismantling locks, repairing and replacing defective parts, and reassembling articles using hand and power tolls and specially designed machines</li><li>Installing security systems, changing locks, cutting keys and opening locks by manipulation</li></ul>Ideally, we are looking for someone with the following:<ul><li>A knowledge of the parts and materials commonly used by Wynns Locksmiths</li><li>A customer-friendly approach</li><li>Competence to use tools and machines needed to provide onsite locksmith services</li><li>Knowledge of Safes and Electronic security installations would be an advantage</li><li>Ability to work unsupervised</li></ul> <h3>Benefits</h3>Full time Work. Vehicle provided to Road Technicians. Superannuation, Personal Leave andAnnual Leave and Long Service Leave. <h3>Task & responsibilities</h3>Duties in brief are:<ul><li>Assembling parts and sub-assemblies of locks</li><li>Building of lock cylinders and padlocks</li><li>Cutting keys</li><li>Repairing faulty locks</li><li>Installation of locks and door furniture</li><li>Onsite re-keying, and general maintenance and repair of locks and other &nbsp;&nbsp;&nbsp;associated hardware</li><li>Provide advice, estimate of costs and quotations for customer's requirements</li><li>Dismantling locks, repairing and replacing defective parts, and reassembling articles using hand and power tolls and specially designed machines</li><li>Installing security systems, changing locks, cutting keys and opening locks by manipulation</li></ul> <h3>Qualification & experience</h3><ul><li>Locksmith qualification [AQF Certificate III including at least two years of on-the-job training or AQF Certificate III (ASCO 4115-15 Locksmith)</li><li>At least three years of relevant experience may substitute for the formal qualifications</li><li>At least 1-year experience preferred</li></ul>

Annual

This is a wonderful opportunity to join and work within Wynn team of dedicated professionals that service broader Melbourne and regional Victoria.

Locksmith [Preston]

Full time

Five Star Locksmith, a leading Australian company, is seeking a skilled to join our team. If you have experience in ing, excellent problem-solving skills, and a commitment to providing top-notch customer service, we want to hear from you!Responsibilities<ul><li>Install, repair, and maintain a variety of locking systems, including mechanical, electronic, and high-security locks.</li><li>Design, cut, and duplicate keys for residential, commercial, and automotive needs.</li><li>Assess security requirements and recommend appropriate locking and security systems to clients.</li><li>Respond to emergency lockout situations, providing quick and professional solutions.</li><li>Program and reprogram electronic locking systems and keyless entry systems.</li><li>Conduct regular inspections of locking mechanisms and identify areas requiring upgrades or repairs.</li><li>Stay updated with the latest security products and technologies in the industry.</li><li>Provide training to clients on the correct use and maintenance of installed locking systems.</li><li>Ensure compliance with Australian safety standards and regulations during all tasks.</li></ul>Qualifications<ul><li>Certificate III in Locksmithing or an equivalent qualification in a related field.</li><li>Trade certification or formal training in locksmithing from a recognized institution.</li><li>Completion of relevant apprenticeships or vocational training programs.</li><li>Specialized training in electronic and digital locking systems, including keyless entry and access control systems.</li><li>Current security licenses (if applicable by state regulations).</li></ul><h3>Relevant Experience</h3><ul><li>A minimum of&nbsp;two years of full-time experience as a locksmith or in a related trade.</li><li>Demonstrated experience in installing and maintaining a wide range of locking systems, from traditional mechanical locks to advanced electronic security solutions.</li><li>Proven ability to work in high-pressure situations, such as responding to emergency lockout calls.</li><li>Experience with safes, vaults, and high-security locking systems for commercial applications.</li><li>Practical experience in recommending and implementing security solutions tailored to client needs.</li><li>Experience in working on large-scale projects, such as setting up master key systems for multi-level buildings or facilities.</li><li>Familiarity with working across varied environments, including residential homes, offices, retail locations, and industrial facilities.</li></ul><h3>Relevant Skills</h3><ul><li>Proficiency in diagnosing and repairing mechanical, electronic, and digital locking systems.</li><li>Expertise in cutting and duplicating keys, including master key systems.</li><li>Ability to program and configure electronic locks and security systems.</li><li>Strong problem-solving skills for emergency lockout situations and complex security issues.</li><li>Familiarity with industry tools such as key-cutting machines, lock-picking sets, and electronic diagnostic equipment.</li><li>Knowledge of Australian safety and security standards for locksmithing.</li><li>Excellent customer service skills, including the ability to communicate technical information to clients.</li><li>Attention to detail for precise installations, repairs, and inspections.</li><li>Capacity to work independently and in diverse environments, including residential, commercial, and industrial settings.</li></ul>Benefits<ul><li>Competitive salary</li><li>Health insurance benefits</li><li>Opportunities for advancement</li><li>Training and development programs</li></ul>&nbsp;

Locksmith

SK SORATHIYA is a trusted name in the automotive repair industry. We are redefining car care with a full range of servicing, repairs, and tyre solutions tailored to keep your vehicle running smarter, smoother, and safer. Whether it’s routine maintenance like logbook servicing, oil changes, or pre-purchase inspections, and suspensions, or expert tyres fitting, wheel alignments, and puncture repairs, we’ve got you covered.We are seeking an experienced Motor Mechanic with a passion for automotive care with a positive attitude and willingness to learn new skills. You will be responsible for the diagnosis, repair and maintenance of a large variety of motor vehicles, ensuring the highest standards and customer satisfaction.Excellent opportunity to develop your career and expand your qualifications whist receiving an excellent salary.&nbsp; <h3>Benefits</h3><ul><li style="text-align:justify;">Competitive Salary: AUD 80,000–85,000 per annum&nbsp;</li><li style="text-align:justify;">Professional Development: Opportunities to work with a skilled team and access to training for staying updated with industry trends.</li><li style="text-align:justify;">A Supportive Work Environment: Be part of a team that values expertise, safety, and customer satisfaction.</li><li style="text-align:justify;">Diverse Range of Work: Gain experience across a wide array of vehicle services, from injector servicing to heavy vehicle inspections.</li></ul> <h3>Task & responsibilities</h3><ul style="list-style-type:disc;"><li style="text-align:justify;">Fault Detection and Diagnosis: Detecting and diagnosing faults in engines and vehicle parts using advanced diagnostic tools and techniques.</li></ul><ul><li style="text-align:justify;">Component Maintenance: Dismantling and removing engine assemblies, transmissions, steering mechanisms, and other components, inspecting parts for wear and damage, and checking functionality.</li><li style="text-align:justify;">Repairs and Replacements: Repairing or replacing worn or defective parts, reassembling mechanical components, and ensuring adherence to manufacturer guidelines.</li><li style="text-align:justify;">Routine Maintenance Services: Conducting oil changes, engine tune-ups, lubrications, and other scheduled maintenance tasks to optimize vehicle performance and ensure compliance with pollution regulations.</li><li style="text-align:justify;">Engine and Component Reassembly: Reassembling engines and components after repair, ensuring proper installation and alignment.</li><li style="text-align:justify;">Performance Testing and Adjustments: Testing and adjusting mechanical systems post-repair to guarantee optimal performance.</li><li style="text-align:justify;">Computer-Assisted Diagnostics: Using computerized equipment to diagnose, test, and analyze vehicle performance issues.</li><li style="text-align:justify;">Vehicle Inspections and Certification: Inspecting vehicles to issue roadworthiness certificates or outlining necessary repairs for roadworthiness compliance.</li><li style="text-align:justify;">Compliance with Safety Standards: Ensuring all tasks meet occupational safety regulations and manufacturer standards.</li></ul> <h3>Qualification & experience</h3><ul style="list-style-type:disc;"><li style="text-align:justify;">Certificate III in light vehicle mechanical Technology, Certficate IV in Automotive Mechanical Diagnosis&nbsp;</li><li style="text-align:justify;">At least Three to fours years of relevant experience in the automotive repair industry</li><li style="text-align:justify;">Licensing or registration (where required) to practice as a motor mechanic in Australia.</li><li style="text-align:justify;">Strong diagnostic and problem-solving skills.</li><li style="text-align:justify;">Ability to work independently while maintaining a commitment to team collaboration and customer satisfaction.</li><li style="text-align:justify;">A passion for the automotive industry and dedication to delivering high-quality repairs and maintenance services.</li></ul>

Looking for qualified and experienced Motor Mechanic

Motor Mechanic

You’ll be responsible for fitting, repairing, balancing and rotating tyres, performing wheel alignments, and providing excellent customer service. This hands-on role offers plenty of variety within the workshop.Key Responsibilities<ul><li>Fit, balance, repair, rotate and inspect tyres on passenger, 4WD, light truck and agricultural vehicles.</li><li>Perform wheel alignments in line with manufacturer&nbsp;specifications.</li><li>Conduct tyre pressure checks and visual inspections to identify wear, damage or alignment issues.</li><li>Maintain workshop cleanliness, safety and equipment in good working&nbsp;condition.</li><li>Accurately record job details, parts usage and work&nbsp;performed.</li><li>Assist with stock control and ensure correct labelling, storage and disposal of&nbsp;tyres.</li><li>Deliver excellent customer service through professional conduct and clear&nbsp;communication.</li><li>Follow all company safety policies, procedures and environmental&nbsp;standards.</li></ul>What We’re Looking For<ul><li>Certificate II in Automotive Tyre Servicing Technology</li><li>Minimum 1 year of experience as a Tyre Fitter</li><li>Current manual driver’s licence (HR or forklift licence a bonus)</li><li>Strong mechanical aptitude and attention to detail</li><li>Reliable, honest, and able to work both independently and as part of a team</li><li>Commitment to workplace safety and customer satisfaction</li></ul>What We Offer<ul><li>Competitive hourly rate based on experience</li><li>Full-time hours, Monday to Friday 8.00am to 5.00pm</li><li>Supportive, family-owned business</li><li>Uniforms and PPE provided</li></ul>&nbsp;

We’re looking for a qualified and experienced Tyre Fitter to join our busy workshop servicing a wide range of vehicles

Tyre Fitter / Wheel Aligner

Edge Cutting Carpentry Pty Ltd. is seeking a skilled and reliable&nbsp;Full-Time Carpenter&nbsp;to join our team. The successful candidate will work on residential and/or commercial projects and will be responsible for delivering high-quality carpentry work in accordance with plans, specifications and safety requirements. <h3>Benefits</h3><ul style="list-style-type:square;"><li>Full-time ongoing position</li><li>Competitive salary plus superannuation</li><li>Supportive team environment</li><li>Opportunity to work on a variety of building projects</li></ul> <h3>Task & responsibilities</h3>Key duties and responsibilities:<ul><li>Read and interpret construction drawings, plans and specifications</li><li>Measure, cut, shape and assemble timber and other materials</li><li>Construct, install and repair frameworks, partitions, floors, walls and roof structures</li><li>Install door frames, window frames, cladding, fascia and related fittings</li><li>Carry out formwork, sub-flooring, floorboards and general finishing carpentry</li><li>Check levels, alignment and accuracy of structures during installation</li><li>Repair and maintain existing timber structures and fittings where required</li><li>Follow workplace health and safety requirements at all times</li><li>Work effectively with supervisors, other trades and site staff to meet project deadlines</li></ul> <h3>Qualification & experience</h3>Qualifications &amp; experience<ul><li>Relevant trade qualification in Carpentry or equivalent</li><li>At least&nbsp;1 year of relevant work experience&nbsp;as a Carpenter</li><li>Ability to read and interpret technical drawings and plans</li><li>Sound knowledge of carpentry tools, materials and construction methods</li><li>Strong attention to detail and ability to work to a high standard</li><li>Good communication skills and ability to work in a team environment</li><li>White Card and any relevant licences preferred or required depending on site needs</li><li>Valid driver licence preferred</li></ul>&nbsp;

Construct, install and repair timber structures, walls, roofs, doors, frames and fittings according to plans, safety standards and project needs.

Full time Carpenter required - Melbourne and surrounding suburbs.

The Painter will be responsible for the application of paints, coatings and other finishes protecting and decorating a range of materials. This position requires self-discipline, motivation and attention to detail.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <h3>Benefits</h3>38 hr per week plus guaranteed minimum overtime plus superannuation. <h3>Task & responsibilities</h3>TASKS-Masking of areas required for painting.-Mixing two-part paints.-Calculate and add thinners as required.-Calculate layer thicknesses and drying times.-Select paints/coatings based on features and requirements.-Apply paints and coatings using brushes, rollers, and conventional or airless spray guns.-Measure paint thickness using gauges.-Carry out touch ups and repairs where required.-Sanding surfaces and surface preparation.-Erect and use ladders and platforms.-Clean and maintain equipment.-Metal Spraying applications.-Able to apply zinc phosphates, inorganic zinc, epoxies, high build epoxies, polysiloxanes, polyurethanes, fluoropolymertopcoats and intumescent coatings to various surfaces using brushes, sprays and rollers-Work from heights and in confined spaces-Must be able to read plans and instructions-Other duties, which may arise from time to timeRESPONSIBILITIES-100% Work Health &amp; Safety compliance&nbsp;-Take measures to avoid contamination of other paints and materials, including segregating areas or blocking with barriers.-Must have a focus on quality and accuracy-Report non-conformances and assist in resolution-Assist with in process inspection as needed-Report any need for repairs and maintenance of workshop equipment.-Comply with instructions from supervision-Maintain proper time keeping practices-Report any need for repairs and maintenance of workshop equipment.-Ensure all tools are used are safe and are used in a safe manner. <h3>Qualification & experience</h3>- Must have 'Working at Heights' and 'Confined spaces'.- Have or be able to obtain Elevating work platform (Boom, Scissor and Vertical lift(over 11m ) licences and experience.- Minimum Cert III Painting pending experience-Good verbal and written communication skills, including the ability to effectively communicate with peers and reading skills is essential.-The applicant must be able to work under pressure and meet deadlines, while maintaining a positive attitude.-The ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard of best work practices is a requirement.Cert III or Cert IV plus experience.Minimum 3 years Experience Painting

A Fantastic place to work and be proud of what you do.

Painters

A Motor Mechanic at Bromotive Pty will perform diagnoses, repairs, and maintainence on vehicle engines and mechanical systems. The role will involve replacing worn parts, performing scheduled services like oil changes, and testing performance, ensuring vehicles meet safety and pollution standards. <h3>Benefits</h3><ul><li>Competitive salary plus 12% superannuation</li><li>Supportive and friendly work environment</li><li>Opportunities for skill development and career growth</li></ul> <h3>Task & responsibilities</h3><ul><li>Diagnose mechanical and electrical issues in vehicles</li><li>Perform routine maintenance including servicing, oil changes, and inspections</li><li>Repair and replace faulty components such as brakes, engines, transmissions, and suspension systems</li><li>Conduct vehicle testing to ensure repairs are completed effectively</li><li>Maintain accurate records of work performed</li><li>Follow workplace health and safety standards</li><li>Evaluates engine and part malfunctions to determine necessary repairs.</li><li>Conducts vehicle inspections to provide roadworthiness certificates or lists of required fixes.</li></ul> <h3>Qualification & experience</h3><ul><li>2–3 years of proven experience as a Motor Mechanic (mandatory)</li><li>Certificate III in Light Vehicle Mechanical Technology or equivalent</li><li>Strong diagnostic and problem-solving skills</li><li>Ability to work independently and as part of a team</li><li>Good communication skills</li></ul>

We are seeking a skilled and reliable Motor Mechanic with 2–3 years of hands-on experience to join
our team.

MOTOR MECHANIC

Spartan Equipments Australia Pty. Ltd., trading as Spartan Quip, is a WA-based manufacturer of transport equipment. We are seeking an experienced Welder (First Class) to join our production team at our Maddington facility. The successful candidate will carry out welding and fabrication of trailer and transport equipment components, ensuring high-quality workmanship, adherence to safety protocols, and compliance with quality standards. <h3>Benefits</h3><ul><li>Competitive salary package plus superannuation&nbsp;</li><li>Stable full-time role with ongoing work&nbsp;</li><li>Supportive team environment and well-equipped workshop&nbsp;</li><li>Opportunity to work on specialised transport equipment builds&nbsp;</li></ul> <h3>Task & responsibilities</h3><ul><li>Read and interpret fabrication drawings, measurements and specifications.&nbsp;</li><li>Perform MIG welding and/or TIG welding (as required) on steel and/or aluminium components.&nbsp;</li><li>Weld and fabricate frames, structural members, brackets, mounts and assemblies to specification.&nbsp;</li><li>Set up and operate welding, cutting, and bending equipment, grinders and associated workshop tools.&nbsp;</li><li>Assist with fit-up, tack welding, alignment and finishing of components to specified tolerances and quality standards.&nbsp;</li><li>Conduct visual weld checks, identify faults and complete rectification work where required.&nbsp;</li><li>Ensure all welds meet company quality standards and relevant Australian Standards.</li><li>Work cooperatively with supervisors and other trades to meet production schedules and deadlines with accurate fabrication.&nbsp;</li><li>Follow WHS procedures and maintain a clean, safe and organised workshop environment.&nbsp;</li><li>Maintain tools and equipment in good working condition and report maintenance needs.&nbsp;</li></ul> <h3>Qualification & experience</h3><ul><li>AQF Certificate III in Engineering – Fabrication Trade or equivalent, or at least three years of relevant work experience may substitute for the formal qualification.</li><li>At least 2 years of welding and fabrication experience in transport equipment or heavy fabrication environments.</li><li>Strong ability to read drawings and work accurately to tolerances.&nbsp;</li><li>Competent and safe use of welding equipment and workshop tools.&nbsp;</li><li>Reliable, safety-focused and committed to high-quality workmanship.&nbsp;</li></ul>

Welder (First Class)

The role involves working on a variety of projects, ensuring all work is completed to a high standard. <h3>Benefits</h3> <h3>Task & responsibilities</h3>Key Responsibilities:- Surface preparation including sanding, patching, filling and priming- Interior and exterior painting using brush, roller and spray- Maintaining clean and safe work areas - using scaffolding, ladders, and drop sheets as required- Delivering high-quality finishes with attention to detail- Following workplace health and safety requirements <h3>Qualification & experience</h3>Requirements:- Minimum 2–3 years painting experience- Good knowledge of painting tools and materials- Ability to work independently and as part of a team- Strong attention to detail and reliability- White Card (preferred)- Driver’s licence (preferred)

We are looking for a reliable and skilled Painter and Decorator to join our team.

Painter and Decorator

We are seeking a qualified, experienced Electrical Engineer to join our growing team at Great Aussie Caravans. This is a full-time position for a 3-year contract, based in Coolaroo, Melbourne. The role involves designing, developing, and maintaining electrical systems in our high-quality caravans.About the RoleGreat Aussie Caravans is looking for a skilled Electrical Engineer to contribute to product innovation, system integration, and maintenance of electrical components in caravans. This is a great opportunity to work in a dynamic and expanding company focused on quality and safety standards.Position Details:Full-time position&nbsp;3-year contract&nbsp;Minimum 38–40 hours per week&nbsp;May require occasional flexibility to meet project deadlines or manufacturing needsKey Responsibilities:•&nbsp;&nbsp;&nbsp;&nbsp;Design and develop electrical systems and components for caravans&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Prepare technical drawings, schematics, and specifications&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Conduct testing, troubleshooting, and maintenance of electrical systems&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Ensure compliance with Australian electrical safety standards&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Collaborate with production and design teams for product improvements&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Oversee installation and integration of electrical systems during manufacturing&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Maintain accurate documentation of designs and processes&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Provide technical support to resolve engineering issuesSkills &amp; Requirements:•&nbsp;&nbsp;&nbsp;&nbsp;Bachelor’s degree in electrical engineering or closely related discipline&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Minimum 3 years’ experience in electrical engineering or related field&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Strong knowledge of electrical systems design, testing, and troubleshooting&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Familiarity with Australian electrical standards and regulations&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Proficiency in engineering design software and tools&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Excellent problem-solving and analytical skills&nbsp;•&nbsp;&nbsp;&nbsp;&nbsp;Strong communication and teamwork abilities

•    Design and develop electrical systems and components for caravans 
•    Prepare technical drawings, schematics, and specifications 
•    Conduc

Electrical Engineer

Locksmiths


                        
                        Looking
to solve your labour shortage? Promote your job opportunities to Working Holiday Makers with Y-Jobs’ portal and fast track your recruitment efforts today!
                    
                    

Y-Jobs offers streamlined hiring tools, industry-first compliance tools and features such as video to attract more talent to your job ads. Save time, reduce costs, improve effectiveness and drive value across the full recruitment marketing value chain.

For Working Holiday Makers, Y-Jobs is the first stop to finding a job while they travel Australia. Local talent gain benefits like using video to better pitch their skills in a competitive market. International talent visiting Australia or already here can easily find Australian employers willing to hire them.

For employers, Y-Jobs is backed by advanced recruitment technology to improve recruitment marketing and compliance. It's also supported by a growing number of partnerships, giving Y-Jobs greater reach via other job boards across the Workinitiatives network with no extra effort.

Australia's number one destination for job openings for Working Holiday Makers!


                                                        Solve your labour shortage, improve your recruitment marketing and streamline your compliance with Y-Jobs. All features are included, plus you’ll be connected to thousands of candidates in both Australia and overseas. Simply register and start posting today!
                                                    

Find your ideal job in Australia simply by uploading your resume and letting our technology find job matches made for you across our ecosystem of job boards.

Y-Jobs is a part of the Workinitiatives network


                    
                    Looking to solve your labour shortage? Promote your job opportunities to Working Holiday Makers with Y-Jobs’ portal and fast track your recruitment efforts today!
                
                

services

2021 available jobs